Kamis, 03 Juni 2010

TIMER 10 MENIT

When ever you need to get an alarm or intimation after ten minutes ,the circuit shown below can be used.The circuit is nothing but  a monostable multivibrator based on IC NE 555.When ever you press the reset push button the green LED D1 glows after 10 minutes.
Circuit diagram with Parts list.
10-minute_-timer-circuit.JPG


Notes.
  • Assemble the circuit on a good quality PCB or common board.
  • The time duration can be set by varying the POT R5.
  • The switch S1 can be a push button switch.
  • The IC1 must be mounted on an IC base

0 komentar:

Posting Komentar